Classic Load Balancers
Start course
2h 49m

This section of the Solution Architect Associate learning path introduces you to the core computing concepts and services relevant to the SAA-C03 exam. We start with an introduction to the AWS compute services, understand the options available and learn how to select and apply AWS compute services to meet specific requirements. 

Want more? Try a lab playground or do a Lab Challenge

Learning Objectives

  • Learn the fundamentals of AWS compute services such as EC2, ECS, EKS, and AWS Batch
  • Understanding how load balancing and autoscaling can be used to optimize your workloads
  • Learn about the AWS serverless compute services and capabilities

Hello and welcome to this lecture covering the last of the load balancers that are available, the classic load balancer. The classic load balancer supports TCP, SSL/TLS, HTTP, and HTTPS protocols. However, it does not offer as wide a range of features as the other load balancers. It is considered best practice to use the ALB over this classic load balancer unless you have an existing application running in the EC2-Classic network. Now, many of you will be unfamiliar with the EC2-Classic platform, and this is because it is no longer supported for newer AWS accounts. In fact, any account created after the 12th of April 2013 will not support EC2-Classic. 

The EC2-Classic platform was originally introduced when the first release of EC2 was made generally available a number of years ago. The EC2-Classic platform enabled you to deploy your EC2 instances in a single flat network shared with other customers instead of inside a VPC. Although the classic load balancer doesn't provide as many features as the application load balancer, it does offer the following which the ALB does not. It supports EC2-Classic, it supports TCP and SSL listeners, and it has support for sticky sessions using application-generated cookies. Again, the classic load balancer works in much the same way as the other load balancers already discussed, and again, cross-zone load balancing can either be enabled or disabled. Let's now take a look at the creation of a classic load balancer. 

So let's now create the last type of load balancer, the classic load balancer. So again, let's go to EC2. Down the left-hand side to load balancers. We have our previous application load balancer and our network load balancer. Let's now create the classic load balancer. So we go across here to create. Give this a name. I'll just call it classic. Select the VPC that I'd like to do. Now here we have our listener configuration, so for ease, let's just have this listed on port 80. And then here, we need to select our availability zones that we'd like. So let's select this one and also this one here. Once we've selected our subnets for our load balancer, we can then assign security groups. I'm going to use an existing security group that I've created previously. Once that's selected, click on Configure Security Settings. Again, it's telling us we're not using a secure listener. Again, for this demonstration, that's more than okay. Now we can configure our health checks. This will probably look familiar to you when we're discussing the application load balancer. So the port and protocol using and the path, as well, the ping path, which is what the load balancer will check to make sure it can reach to determine if the instance is healthy or not. Once you're happy with those details, select Add EC2 Instances. 

Now here we can select the instances that you want to associate to the load balancer, and this is different to the application load balancer and the network load balancer, where we used target groups. With the classic, we simply select the instances that we want included, so we don't use target groups for a classic load balancer. So for this example, we can select those two options, coming down across to add tags. Put in any tags you want associated for the load balancer. Click on Review and Create, confirm that you're happy with your settings, and then click on Create. And there we have it. So if we go back here, you can now see that we have our three different load balancers that we've created. Here we have our application load balancer, this was our network load balancer, and here we have our classic load balancer. And it's as simple as that. 

Before I finish this lecture, it's a good time to take a quick look at the comparison between the three load balancers that we've looked at. To help with this, AWS Provides a great table to show the feature differences between each ELB, which can be found using the link shown on screen. We can clearly see that the ALB is the most feature-rich. However, the NLB supports some significant differences to that of the ALB, such as support for static IPs, EIPs, and preserving source IP addresses. 

That now brings me to the end of this lecture. Coming up next, I shall be looking at auto scaling and the benefits that this feature brings.



About the Author
Learning Paths

Stuart has been working within the IT industry for two decades covering a huge range of topic areas and technologies, from data center and network infrastructure design, to cloud architecture and implementation.

To date, Stuart has created 150+ courses relating to Cloud reaching over 180,000 students, mostly within the AWS category and with a heavy focus on security and compliance.

Stuart is a member of the AWS Community Builders Program for his contributions towards AWS.

He is AWS certified and accredited in addition to being a published author covering topics across the AWS landscape.

In January 2016 Stuart was awarded ‘Expert of the Year Award 2015’ from Experts Exchange for his knowledge share within cloud services to the community.

Stuart enjoys writing about cloud technologies and you will find many of his articles within our blog pages.